Plastic granulation dewatering and draining device manufacturer

Plastic granulation dewatering and draining device manufacturer

Description

PP, PE waste film crushing cleaning and recycling production line is through the introduction, digestion and absorption of the world's advanced concepts and technologies in the same industry, combined with today's development needs and waste plastics II The characteristics of the second use were developed. It can meet the environmental protection requirements for recycling of waste plastics at home and abroad. The primary materials to be treated are PE/PP plastic, PE/PP plastic waste, waste PP woven bags, plastic bags, household garbage plastics, and waste plastic film. The entire production line can be easily cleaned of waste plastic products from the start of the operation to the finished product. Waste dirty agricultural film, waste packaging material or hard plastic is obtained step by step here

  • Product Details Page 1

  • Product Details Page 2

  • Additional product information

  • Product Description

this < the="" beneficial="" effect="" of="" a="" class="{$$0$$}">dewatering machine: a masterbatch type dehydrator of the water strip dewatering machine, the length of the masterbatch type dehydrator is based on actual work The demand can be set between 3m and 5m, and the masterbatch type dehydrator is tilted. Place it so that the water outlet at the lower end of the tank is facing down. The tubular dehydrator is composed of a tank body and an inner tube body. The inner wall of the inner tube body is laterally provided with a plurality of curved filter grooves, and the groove sides of the filter grooves are different in height, and preferably, the first groove side and the first groove side The range of the height difference of the two groove sides is set between 0.05 mm and 0.2 mm. The extension line of the first groove side forms an angle with the extension line of the second groove side. Preferably, the range of the included angle is set between 5° and 10°. The primary molded masterbatch has a high surface temperature and needs to be immersed in water for cooling. The water-incorporated colored masterbatch enters the tubular dehydrator, and the blower installed outside the tubular dehydrator drives the mixture of masterbatch and water to adhere to the inner tube. The wall of the body moves forward. When passing through the filter groove laterally disposed on the wall of the inner tube body, the mixture moves forward along the upwardly convex groove edge to avoid the rubbing of the masterbatch to the groove edge. Loss, secondly, the upwardly convex groove edge points to the middle of the inner tube body, which is more advantageous for the moving color masterbatch to gather in the middle of the inner tube body along the upwardly convex groove side, so as to prevent the masterbatch from staying in The wall of the inner tube also helps to disperse the agglomerated masterbatch into a granular shape, thereby increasing the rate of movement of the masterbatch. At the same time, the water in the discrete flow state flows out of the inner tube body through the passage between the first groove side and the second groove side. Since the size of the channel is designed to be smaller than the size of the masterbatch, it can achieve rapid dehydration and prevent the masterbatch from being blocked in the channel. The filter tanks are uniformly arranged at intervals on the wall of the inner tube body. When the mixture flows through each of the filter tanks, water in the mixture continuously flows out from the passage of each of the filter tanks, thereby improving the efficiency of dehydration of the masterbatch. The two ends of the can are sealed and disposed outside the inner tube body to provide a good airtight environment to provide a permanent driving force for the movement of the mixture. In the process of masterbatch collection, the masterbatch can better remove the moisture on the surface of the masterbatch by colliding with each other. Since the masterbatch type dehydrator is placed obliquely, the water is converged into a water flow by the action of gravity. The water outlet at the lower end of the body is quickly discharged.

Related News

Product Recommended

  • One-tube multi-purpos...
  • Dewatering machine
  • Plastic granulation d...
  • Masterbatch dewaterin...
  • Masterbatch dewaterin...
  • Multi-function dehydr...