Tube type dewatering machine plays an important role in the dewatering and drying of materials. The device removes moisture from the material to complete its purpose by centrifugal force generated by rapid rotation. During use, remember not to put too much material, and to balance the material. In the course of the operation, the materials are also stopped from being added, otherwise some materials may be thrown out of the machine causing injury.
In the daily maintenance operation, as an operator, we must understand the performance and structure of the tubular dewatering machine, so as not to cause unnecessary loss and damage. Here, the Xinxin tube type dehydrator maintenance manufacturer gives us some suggestions. I hope that we will not be too careless in the operation process!
When the device starts running, you should not place extra items on top of the top cover. If you are afraid of 10,000, you will be afraid that it will be bad if you use an accident. Secondly, it is not used during use. Freely brake the opening and closing arm to avoid damage to the machine parts. In addition, if the gas heat conduction oil furnace is running, if the abnormality is found, the power supply should be blocked immediately, and the brake lever should be used to reach the braking function, and the equipment should be stopped. You can check the cause and clarity of the problem.
Regarding the mechanical equipment of the tubular dewatering machine, we should do regular inspection and maintenance, such as: regular oil filling of lubricating oil, maintenance of various parts... If there are some emergencies, please contact the original manufacturer. Negotiate and resolve. In fact, many buyers want to go back to the tubular dewatering machine with high efficiency, long life and few problems. I don’t know if my maintenance and operation is a very important process. From now on, I am optimistic about your tubular dewatering machine. It can be used for a long time, "healthy health".