Plastic Dewatering Machine produced by our company It can effectively dehydrate the plastic particles efficiently, remove impurities and moisture from the materials, and use the plastic dewatering machine produced by our company to protect the safety of the operators and increase the power. Generally, these impurities are left on the screen inside the equipment. In order not to affect the working power of the dewatering equipment, the screen of the plastic dewatering machine should be cleaned regularly to replace and improve the working power of the plastic dewatering machine produced by our company.
How does the plastic dewatering machine replace the screen? First, the residual material in the dewatering equipment should be removed first. Then wash with water. Then you can use a wrench and other things to loosen the screw of the plastic dehydrator casing and disassemble it. Then, you can remove the screen cover.
Be careful not to drop the screw or nut in the dehydrator during the disassembly process, otherwise it will easily damage the dehydrator liner and damage the equipment. After the screws are loosened, the old screen can be removed and the new screen installed on the plastic dewatering machine. Then, the orientation of the new screen can be fixed and tightened with screws. After the zui, after the installation is complete, you can power on the test machine, and it can be used normally after normal operation. .
The screen of the plastic dewatering machine is one of the key components, which affects the quality of plastic dewatering. We can provide customers with replacement screens, which can be selected from different diameters for convenient use. Daily attention should be paid to the maintenance of the dewatering machine screen to avoid damage to the screen by large particles and hard objects, which can reduce the number of times the screen is replaced and avoid the cost of the dross.
In fact, plastic dewatering machine feeding is simpler than other equipment, reducing the process of manual operation, feeding and receiving materials are more convenient. When using a plastic dewatering machine, the prepared plastic material is simply placed in a funnel-type feed hopper, and the plastic is driven into the machine by the feeding motor. The machine has a special blade that uses laser cutting to feed and feed faster. The plastic enters the quick cleaning door under the effect of the motor. The continuous effect of the plastic material passing through the blade inside the screen is upward, and the moisture of the plastic material is reduced due to the gravity effect, and the solid-liquid separation is quickly realized.